Brighter outdoor screens that draw up to 30% less power, weight 35% less, and stay sealed to IP65 on both sides.

REFRESH RATE

POWER SAVING

LIGHTER CABINET

BRIGHTNESS

WHY XMH -ES SERIES

Sealed, passively cooled aluminum cabinets. Nothing to clog and no fan noise.

3840 Hz refresh rate and 65536 grey levels. Motion stays sharp on camera and gradients stay smooth.

Hard-connected modules swap out from the front or the back, so it fits walls, poles and frames.

Up to 6500 nits, easy to read in direct sun, Matte corrugated masks keep contrast at 10000:1.

160° horizontal and 140° vertical, so the picture holds up from the side of the road.

Average draw of 200-300W/㎡, compared with 450W/㎡ on a regular outdoor screen.

Matte corrugated masks for very high contrast

A matte, corrugated module mask custs glare from sunlight, so blacks stay deep and colors stay vivid at a 10000:1 contrast ratio.

FRONT SIDE

Flatness ≤ 0.1mm across the splice

Color temperature 1000 - 18500 K, adjustable

Seamless joins: fine structure, flat surface

ELECTRIC POWER SAVING

Average

Max

Per 1 ㎡

200 - 300 W

780 W

Average

Max

450 W

1000 W

Per 1 ㎡

BACK SIDE & STRUCTURE

A steel fast-lock system and a precision aluminum frame give quick installs with flat, even splacing.

Hard connections let you service everything from the front. Modules swap out with no cables to unplug.

Service from either side, for walls, rooftops, poles and other outdoor sites. 

Both faces are sealed to IP65 and run from - 20℃ to 60℃ at 10 - 85% RH.

Choose a pitch to highlight it. A smaller pitch looks sharper up close, and a larger pitch costs less per sqm for viewing from the far away. 

Stadium & Perimeter Screen

Fit the ES series with a soft mask, a folding stand and a soft rubber top, and it works as a perimeter board for football, rugby and other events. 

Building facades & billboards

Retail storefronts & malls

Stadiums, arenas & event stages

Transport hubs & public squares